Introduction
The Quest ATR Accessory is a performance single-reflection ATR accessory from Specac designed for laboratory spectroscopic sample analysis in the mid- and far-infrared. With innovative optical design and durable monolithic diamond ATR crystal option, this sets the benchmark in performance and value for ATR spectroscopy.
The Quest's innovative optical design is based around all reflective gold-coated optics, and features Specac's Synopti-Focal Array technology with precision-moulded aspheric mirrors. These features allow for a high throughput accessory with an extended wavelength capability suitable for both mid and far-IR spectroscopy.
Four interchangeable ATR crystal pucks are available for the Quest:
- High throughput diamond
- Extended wavelength diamond
- ZnSe
- Ge
Each puck is made from hardened stainless steel and are held in place on the accessory magnetically making them easily interchangeable without requiring additional alignment.
Features
Strong and durable monolithic diamond
Extended wavelength capability from 10,000 to 40 wavenumbers
High spectral quality and high throughput capability
Interchangeable Diamond, ZnSe and Ge ATR crystal puck options
Applications
pharmaceutical applications
polymer systems under high pressure
biological system research
Ordering Information
GS10800-X Quest ATR Diamond Accessory
GS10801-X Quest ATR Diamond Extended Range Accessory
GS10802-X Quest ATR ZnSe Accessory
GS10803-X Quest ATR Ge Accessory
Please specify spectrometer make and model when ordering X represents Top Plate colour, the colours available are:
B for Black O for Orange
R for Red G for Green
Y for Yellow A for Aqua
P for Purple
Spares and Accessories
GS10810 Quest ATR Diamond Puck
GS10811 Quest ATR Diamond Extended Range Puck
GS10812 Quest ATR ZnSe Puck
GS10813 Quest ATR Ge Puck
GS10820 Quest ATR Stainless Steel Flat Anvil
GS10821 Quest ATR Stainless Steel Pellet Anvil
GS10825 Quest ATR Volatiles Cover
GS10707 Purge Bellows (pair)
[Maximum Anvil Travel]: | 1.8 cm |
[Crystal Puck Options]: | Diamond. Znse & Ge |
[Puck Material]: | Hardened Stainless Steel |
[Active Area of Crystal]: | 1.8 mm (Dlamond), 3.4 mm (ZnSe & Ge) |
[Wavelength Range]: | 7,800 - 400 cm-1 (Diamond) 10,000 - 40 cm-1 (Extended Range Diamond) 7.800 - 480 cm-1 (ZnSe) 5.550 - [450 cm-1 (Ge) |
[Nominal Angle of Incidence]: | 45° |
[ATR Seal]: | Metal Compression seal |
[Optics]: | Gold Coated, All Reflective |
[Anvil Options]: | Plane. Pellet and Volatiles Cover |
[Sample Load]: | 40 lbs (10,000 psi over diamond area) |
[Purge Fitting]: | 1/4" |
[Weight]: | 1.6 Kg |
[Dimensions (W x D x H)]: | 15 x 15 x18 cm (excluding purge bellows), 28 x 15 x 18 cm (including purge bellows) |